Raymond Mill - the originator of Pendulum Grinding Mill
Max feeding size: 15-40mm
In terms of traditional pendulum roller mill, the R-series grinding mill has been upgraded in many aspects. All of the technical parameters takes the leading role in China mill industry. The R-series grinding mill ranges from 2R to 6R, including 2R2713, 3R3220, 4R3216, 4R3218, 4R3220, 5R4121, 5R4125, 6R5127. This mill is widely used to grind any non-metal minerals with Moh's hardness below 7 and moisture below 6%, such as limestone, calcite, activated carbon, talc, dolomite, titanium dioxide, quartz, bauxite, marble, feldspar, fluorite, gypsum, barite, ilmenite, phosphorite, clay, graphite, kaolin, diabase, gangue, wollastonite, quick lime, silicon carbide, bentonite, manganese. The fineness can be adjusted from 0.18mm(80 mesh) to 0.038mm(400 mesh).
Raymond mill, or R series grinding mill, pendulum mill, originated by Raymond brothers around 1880s. Raymond mill was introduced in China around 1950s, Guangxi Guilin was one of the grinding mill production base.
After the practicing and innovating of more than 100 years, the structure of R mill is becoming better day by day. As a professional grinding mill manufacturer, Guilin Hongcheng applied latest technology to upgrade Raymond mill and made a better performance for it.
HCM introduces our original new Pendulum Roller Mill. With larger grinding surface, HCM Raymond Mills increase the production capacity and reduce per capita energy consumption.
HCM Vertical Mill is designed to dry, pulverize, classify and collect various types of minerals, concrete, cement, coal, limestone, calcite, active carbon, quartz stone, marble, feldspar, barite, gypsum, titanium iron ore, phosphate rock, coal gangue, zircon sand, kaolin and other chemicals with feed sizes ranging from 15-40 mm, and output fineness upto 97% 80-400 mesh.
HCM Raymond Mill is suited for dry and wet grinding process, for different Mohs scale of hardness, for wide Mesh range of material sizes from granular to fine, with TPH efficient performance, stable operation, low energy, long lifetime and short downtime.
Pendulum Roller Mill has some advantage features including overlay welding roller assembly, automatic lubrication system, pendulum swing grinding and other patented technologies.
Raw material is firstly broken by jaw crusher into required particle size, which are carried by bucket elevator up to the storage hopper. The vibration feeder then conveys the crushed materials at a fixed rate into the grinding chamber of the main unit for pulverizing.
The three rollers hung upon the spider-arm are running around the shaft. With the centrifugal force, the four rotational rollers will go around the ring tightly. The raw materials is put up between the rollers and rings by the blade to make the raw materials into powder. The grinded materials is blown up to the classifier, through which the powder is separated by the airflow.
Coarse particles fall back down to the mill for regrinding.
The needed particles will go into the collector where products will be removed through the discharge opening. The purified air flows to the air blower through the pipe above big cyclone collector. Air flue is circular type. Air stream in all pipelines is negative pressure except for that in the air blower and grinding chamber, which improved the working condition in the workshop.
Wind volume in air flue increases as the moisture in material changes into vapour leaking in from the flange conjunctions and feed opening. Added air volume is transporting through the air blower and after-wind pipe, to simple collector. The end powder enters the collector with air stream and discharged from discharge valve.
R-series Grinding Mill is widely used to grind any non-metallic minerals with Mohs hardness below 7 and moisture below 6%, such as limestone, calcite, activated carbon, talc, dolomite, titanium dioxide, quartz, bauxite, marble, feldspar, barite, fluorite, gypsum, ilmenite, phosphorite, clay, graphite, kaolin, diabase, gangue, wollastonite, quick lime, silicon carbide，bentonite, manganese.
The fineness can be adjusted from 0.18mm(80 mesh) to 0.038mm(400 mesh), whose range is much wider than that of traditional raymond mill.
R-Series Roller Mill consists of main mill, electromagnetic-vibrating feeder, constraint turbine classifier, pipes, high pressure blower, cyclone separator, hopper, electronic control system, collecting system, jaw crusher, pan elevator, base, central shaft support, ring, spider-arm, roller assembly, shaft, lifter support, lifter support base etc.
The main mill consists pedestal, return air box, shovel, roller, ring, housing and motor. The ring and roller are made from wear-resistant material, whose surface is also given wear-resistant treatment. For the driving system, there are reducer and double-motor system for option. The classifying system uses the turbine classifier.
Various feeding and conveying system can be done separately according to different material. The close system with cyclone plus pulse-jet collector and the open system with only pulse-jet collector are available for collecting system. As to the control system, you can select auto control or remote control.
Main technical data:
Note: The capacity data is for limestone.