INTRODUCTION OF PRODUCT                                                                                                                                                                                                                        

Nutshell activated carbon is widely used in the deep purification and gas phase adsorption of domestic water, industrial water and wastewater, such as petrochemical, power plant, food and beverage, sugar and wine, medicine, fish farming and other industries water purification treatment, can effectively absorb water Free chlorine, phenol, sulfur and other organic pollutants, especially the precursors of mutagenic substances (THM), can be filtered to remove impurities and odors. It can also be used for workshop exhaust gas purification, solvent filtration, decolorization, purification, etc., gas desulfurization, petroleum catalytic reforming, gas separation, pressure swing adsorption, air drying, food preservation, gas masks, solvent carriers, organic solvent recovery; precious metal refining ; Catalysts and catalyst carriers in the chemical industry.

Activated carbon has the characteristics of developed pore structure, large specific surface area and smooth surface, so ordinary milling equipment is not suitable for pulverizing activated carbon. The output of traditional Raymond mills is very low, and activated carbon is particularly light and easy to enter Raymond. The grinding roller assembly increases the maintenance cost. Aiming at the characteristics of activated carbon, the activated carbon mill produced by Guilin Hongcheng changed the original material of the wearing parts such as the roller bearing seal and the roller grinding ring to make it difficult to enter dust and damage.

ADVANCE ACTIVATED CABON RAYMOND MILL GRINDER is a technical update based on the R-type mill. The technical indicators of this product have been greatly improved compared with the R-type mill. It is a new type of high-efficiency and energy-saving mill product. The fineness of the finished product can be adjusted arbitrarily between 22-180μm (80-600 mesh). This product is an updated product of the R-type mill. Among them, the HC1700 large vertical pendulum mill is a large Raymond mill that has been successfully developed early in China. Its output is about 2.5 to 4 times higher than that of similar 5R equipment. It effectively increases the unit output of a single device and reduces the unit. Output and energy consumption are ideal for large-scale milling projects.

Finished product size: 22-180μm

Production capacity: 1-25t/h

ADVANTAGES AND FEATURES                                                                                                                                                                                                                       

New technology, spider-arm and pendulum grinding system. The machine has very small vibration, low noise, stable mechanical  operation and reliable performance.		The processing capacity of materials is larger and the efficiency is  higher. Under the condition that the total power of the R-type mill is  unchanged, the output is increased by more than 40% year-on-year, and the unit power consumption cost is saved by more than 30%.
The remaining air outlet of the mill is equipped with a pulse dust  collector, and its dust collection efficiency reaches 99.9%. All the  positive pressure parts of the main machine are sealed, and a  dust-free processing workshop is basically realized.		Adopting a new sealing structure design, the grinding roller device  can be filled with grease once in 300-500 hours. In addition, there is no need to remove the grinding roller device to replace the grinding  ring, which is more convenient for maintenance.

MILL STRUCTURE & WORKING PRINCIPLE                                                                                                                                                                                                   

HC advanced activated carbon mill consists of base, center shaft support, grinding ring, spider-arm, roller assembly, center shaft, lifter support, lifter support base, housing and other structures.

WORKING PRINCIPLE

Material is broken by jaw crusher firstly into required size, which are carried by bucket elevator up to storage hopper, again by feeder quantitative into host cavity for grinding, host cavity support in the plum flower rack roller device rotation around the center axis, roller under the action of centrifugal force, horizontal swing outward, so that the roller compaction of ring, roller grinding roller rotation around at the same time.

ACTIVATED CARBON POWDER PRODUCTION PROCESS                                                                                                                                                                            

1. Crushing of raw materials

The large pieces of activated carbon are crushed by the crusher to the fineness (15mm-50mm) that can enter the mill.

2. Grinding

The crushed small pieces of activated carbon are sent to the storage hopper by the elevator, and then sent to the grinding chamber of the mill evenly and quantitatively by the feeder for grinding.

3. Classification

The ground material is classified by the classification system, and the unqualified powder is classified by the classifier and returned to the main engine for re-grinding.

4. The collection of finished products

The powder that meets the fineness is separated and collected in the dust collector through the pipeline through the airflow. The collected finished powder is sent to the finished product silo through the discharge port by the conveying device, and then is packaged by a powder tanker or an automatic baler.

TECHNICAL DATA                                                                                                                                                                                                                                              

Note:

1. The Models above are equiped with newly designed spider-arm structure.

2. The capacity is for limestone powder, and specification is just a reference. The actual production depends on these materials being processed.

SUCCESSFUL CASES                                                                                                                                                                                                                                       

   ACTIVATED CABON RAYMOND MILL PROJECT

     Processing material: Activated carbon

    Fineness: 200 mesh

    Output: 1t/h

    Equipment configuration: 1 HC1700

OTHER RELATED GRINDING MILL RECOMMENDATIONS                                                                                                                                                                            

      ULTRAFINE GRINDER RAW VERTICAL TURBINE TYPE          SUPERFINE MICRO POWDER CRUSHER MACHINE ULTRA-FINE            CUSTOMIZED ACTIVATED CARBON EQUIPMENT 

      GRINDING MILL FACTORY                                                             GRINDER MILL COMPANY                                                                             ULTRAFINE GRINDING MILL MANUFACTURERS